home Landscape design How to open an interior door. Selecting hinges for aluminum doors based on strength and appearance. How to open an interior door with a latch

How to open an interior door. Selecting hinges for aluminum doors based on strength and appearance. How to open an interior door with a latch

Increasingly, interior doors in the house are equipped with locks. This allows you to retire in a quiet environment or hide from unwanted eyes. Compared to older gate valves, the design of modern gate valves is more intricate. But at some moments this advantage goes from obvious to dubious. We are talking about those cases when the handle or latch for the door jams and it is impossible to get inside. It’s good if there are just things lying there that need to be gotten out right now, but when there’s a child in the room and he can’t get out, it becomes just a disaster. We will tell you how to properly open an interior door without a key, so as not to knock out the door or break the lock.

general information

The most common option is a tongue lock with a twist or push handle for the door on which the locking mechanism is located. It is operated by turning a key or a round latch. Sometimes the latch closes separately.

A jammed mechanism or a tripped door latch can put you in an awkward position if you're locked in a room and can't get out. If the lock is faulty or the door accidentally slams shut, you will have to use your wits and ingenuity to sort out the problem yourself.

In this case, do not despair and panic. There are various ways to open an interior door without causing damage.

First of all, you need to find out the reason why it is impossible to open the lock. See what items are at hand, and then use them to try to get out.

Below are some effective tips on how to open the lock of an interior door in various situations.

How to open if the handle is stuck?

In most cases, problems with spontaneous blocking are encountered by those who have an interior door handle with a lock installed. A locking latch secures its position, preventing it from turning. In this case, the tongue is in its normal position, and it is enough to press something on it.

The principle of operation of a plastic card with a lock

A plastic card, a ruler, a piece of paper folded several times, wire or another flat object will help here.

Insert the card into the gap between the door leaf and the jamb, apply pressure and pull back the tab. This solution will work if the tongue is turned towards you with the beveled side.
If the beveled edge is on the opposite side from you, then you need to cut the card at an angle of 45 degrees, pry the tongue with the sharp end and press it on top. You can also use wire or a knife. One end of the wire is inserted into the slot under the tongue and pulled out from above.
After the manipulation has been completed, all that remains is to open the door.

Such actions will also help if the lock is broken; the handle moves, but the tongue remains in place.

How to open a slammed door with a latch?

The latch is designed in such a way that if left in the wrong position, it can automatically operate when the door is suddenly closed. In this case, you will have to unscrew the bolts and remove the handle and face plate to get to the latch structure.

There is a hole on the outer part of the lining into which, if you insert a knitting needle or a thin nail, you can open the lock

You will need a screwdriver; if you don’t have one, then, for example, a nail file or knife will help.

After removing the handle body, take a pencil or nail. You need to find the latch mechanism and press it. Open the door while holding the mechanism in this position.

A flathead screwdriver works best to open the latch.

What to do if the key is left in the lock?

When the key remains in the keyhole on the opposite side, attempts must be made to get it out. To do this, use the following algorithm:

Place a piece of paper or a piece of cloth under the door and try to knock out the key so that it falls on the paper. Then take out the paper with the key.
Use a thin object to push the key out. You should act carefully so that its end does not break off and remain in the well - this will greatly complicate the situation.

The trick of pushing the key will only work if the hole is located on both sides. If not, you will have to unscrew the bolts using a screwdriver or other available tools, remove the facing plate and dismantle the entire locking mechanism.

What to do if the key is broken?

Before opening the interior door, you will need to carefully remove the key piece from the keyhole. This is done in different ways:

Using a magnet. The simplest and quick way, but this will require a strong magnet. It is also worth considering that the material from which the key is made must have magnetic properties.
Insert a thin jigsaw file into the hole. Use the serrated side to pick up the key and pull it out.
If part of the fragment looks out, you can try to grab it with pliers.
Straighten the fishhook and pry the piece off with the notch at the end.
The same can be done with a thin wire or pin.

Can it be opened without a key?

Complex locking mechanisms are usually not installed inside apartments. A simple lock, which does not provide increased protection against burglary, can be easily opened using a pin, paper clip, knitting needle or any other thin, sharp object.

If you don’t have a key and don’t know what to do if the door slams, follow these simple tips:

You will need a hairpin, pin or paper clip made of durable material that will not break in the lock.
We insert one end into the keyhole and try to feel the moving parts inside the lock.
You need to try to lift them until they click.

How to open a lock without a key on an interior door is shown in the video:

Brute force should only be used when all methods have been tried and nothing has helped. But before you break anything, try to remove the glass from the door leaf. To do this, you need to remove the beads holding the glass and carefully pull it out. In this case, the damage will be minimal - you will have to insert the glass back and purchase new glazing beads, but the door leaf and frame will not be damaged.

There is another way in which you will need to replace the door lock:

We screw a self-tapping screw into the keyhole.
We grab the screw with pliers and pull out the lock mechanism.
Use a screwdriver to turn and open the lock.

More crude methods are also possible: cutting off hinges, knocking out or breaking down the door. It is better to use them as a last resort.

If you cannot get out of the current situation on your own, call your relatives or friends for help. Call a door installation or repair company and call a technician. His services will cost less than completely replacing the door leaf or frame.

IN special cases, for example, if a small child is locked in a room, electrical appliances are turned on, or something may burn on the kitchen stove, feel free to call the Ministry of Emergency Situations or firefighters.

Problems with locks jamming usually occur on low-quality fittings or on those that have not been looked after for a long time. You should not skimp on constipation, especially in families with small children. As for the bathroom or toilet, where locking mechanisms should a priori be installed, instead of complex locks or fashionable handles with latches, install an old, time-tested latch. It is advisable to place it at a height of more than one and a half meters, otherwise neither a bank card nor paper clips with staples will save a child locked in the bathroom - you will have to knock down the door.

And finally, just for information - 3 life hacks on how to open a lock without a key

Interior doors are not subject to such high requirements for protecting premises as for entrance doors. However, the interior door can also be equipped with a latch lock. It is imperative to install locks on interior doors in office premises, since there are always a lot of strangers in such institutions. Locks are used on interior doors and in residential premises. Sometimes such an absurd situation arises when, due to a draft or negligence, the door slams shut spontaneously. How to open the lock in this case without causing significant damage to property?

Locks on interior doors are not as reliable and powerful as those used on entrance doors. After all, their purpose is to simply restrict access, and not to protect against hacking. But locks on interior doors are often equipped with latches so that you can lock the door in the closed position without locking it.

Sometimes it happens that the door accidentally slams shut. The “culprit” of this ridiculous situation could be a draft or a simple accident. How can you open the door in this case without breaking the lock?

How to open the door?

Anyone can experience a door slamming shut spontaneously. Of course, this situation is quite ridiculous, but also very unpleasant. After all, as a rule, a slammed door disrupts all plans. You have to drop everything and try to open the lock and restore access to the premises.

What to do if the door slams? First of all, don't panic! If there is no force majeure, such as a fire or some other life-threatening situation, you should not try to knock down the door. After all, it will then require replacement or expensive restoration.

You can try to open the door using various available means. The choice of opening method depends on the type of lock and the availability of various items at hand.

Door opening methods

So, faced with the fact that the interior door has slammed shut, you should try to open it without breaking the lock and knocking the door out of the frame.

Metal or plastic plates

If the door has a simple lock with a latch, it can be opened using a thin plate of hard material. Where can I get such a record? Look in your wallet, today almost everyone has bank, discount and other plastic cards that are quite suitable for opening a slammed door equipped with a latch.

In order to open the door, you need to slide the card along the frame of the box, trying to carefully move the tab. At the same time, the latch mechanism is activated and to open the door it will be enough to turn the handle.

Opening a door equipped with a latch mechanism

It happens that when trying to open a slammed door, turning the handle does not lead to success. For some reason the mechanism does not work, and the sash remains in the locked position. To solve this problem, you need to do this:

Using a screwdriver, unscrew the bolts that secure door handle, and remove the insides of the lock.

Advice! It happens that you don’t have a screwdriver at hand. In this case, you can use improvised objects to unscrew the bolts. For example, the handle of a teaspoon or a small coin.

After the contents of the lock have been removed, you will need to feel for a small protrusion in the center with a pencil or thin stick. You should press this protrusion and turn the handle at the same time. This will activate the latch mechanism and the door will open.
All that remains is to return the disassembled parts to their place.

Probably everyone has seen how in detective stories, attackers (and sometimes detectives conducting an investigation) opened locks by using master keys. Of course, the average citizen does not have a set of master keys at hand, so he will have to use another suitable tool. For example, a metal knitting needle or a thin, pointed file for manicure.

The main goal of the work is to use a long and thin metal object to feel the moving parts of the mechanism and carefully lift them. If this can be done, a characteristic click will be heard and the lock will be opened.

Pushing out the key

It happens that when the door slams, the key is inserted into the keyhole from the back side. In this case, to open the door you need to try to remove the key. How can you do this while on the other side of a slammed door?

You need to take a newspaper or a piece of film and push it under the door.
Now, by making gentle pushes and turns of the handle, you need to try to knock the key out of the keyhole.

Advice! When trying to knock out the key, you should not act too roughly, as the key may fly far away and not hit the newspaper prudently slipped under the door.

If the key is held firmly in the hole and cannot be knocked out, you can try to push the key out with a screwdriver, a knitting needle or a rod removed from a ballpoint pen.

If you managed to knock out the key, you will need to pull it out, pulling up the newspaper and open the door from your side.

If all else fails

If the methods described above for opening a slammed door did not give the desired result, then still, do not rush to break the door out of the frame. You can try to dismantle the lock completely. If you disassemble the lock carefully, it can then be reinstalled.

So, if the interior door accidentally slams shut, there is no need to rush to take extreme measures in the form of knocking out the door leaf. After all, then you will have to restore or, most likely, completely change the door and frame. It is worth trying to solve the problem in other ways that do not cause significant damage to the door structure.

Content

If a key or locking device is lost or broken, opening the lock may be the only way to enter or exit the premises. What to do if you don’t have time to call a foreman or mechanic from the housing and communal services? Arm yourself with available tools (a paper clip, an awl, a stationery knife) and try to open the door yourself.

How to open an interior door without a key

The design of locking devices in interior blocks is generally simple. Unlike entrance doors, such doors are not difficult to open. What tools and aids are used for this:

flat screwdriver and pliers;
a plastic card;
knitting needle, awl, hairpin or paper clip;
a sheet of thick paper;
nail file, scissors or knife.

Unlock

Most locks in interior units have a key that, when pressed, inside blocks the mechanism. Often the device is activated without human intervention. For example, when a door slams strongly, the door leaf hits the wall, or the structure breaks. The security system helps fix the problem. How to open a locked interior door without a key:

Examine the outside of the handle. There is a small hole on the side opposite the latch.
Select a tool or device that will fit into the gap (hairpin, straightened paper clip, nail).
Insert the selected item into the hole, unlock the lock with a light press.
Open the door.

If the mechanism breaks down

To open a locked door if the handle breaks, you will need a flat object (plastic card, utility knife, ruler). What to do if the mechanism is broken, jammed or jammed:

Insert a flat object (for example, a plastic card) into the gap between the door leaf and the latch at the latch level.
Tilt so that the far side of the tool touches the beveled part of the tongue.
Lightly press on the one you are using improvised means while simultaneously tilting the handle down.
Pull back the tongue, pull the sash, open the door.

If the key is in the hole on the back side

You can open a slammed interior door with the key remaining inside the locked room in the following way:

Slide a sheet of paper between the floor and the door leaf so that a small “tail” remains outside.
Insert an unbent paper clip, hairpin, bobby pin or knitting needle into the keyhole. Slowly squeeze out the key.
When you hear the sound of falling, carefully remove the paper from under the door.
Use the key to unlock the lock from the outside.

If the locked door frame has a threshold, you will not be able to remove the key using paper. To get into the room, you will have to pick the lock. How to disassemble a simple mortise device with a handle:

Using a tool with a flat end (nail file, stationery knife), pry and remove the trim.
Use a flat-head screwdriver to secure the stopper, and use a Phillips screwdriver to unscrew the screws that connect the internal and external parts of the structure.
Remove the handle, take out the cylinder. Open the door.

How to open a lock without a key on the front door

Locks with a complex device and several levels of protection are installed on metal entrance doors for apartments and houses.

You can only try to open a Chinese-made mechanism with master keys. High-quality locks will have to be unlocked with the help of a specialist or broken into, which can lead to damage to the device and deformation of the door leaf. The process will depend on the type of locking mechanism.

Cylinder

If the key to the cylinder lock is lost, and it is impossible to make a duplicate, you will have to master the role of a professional burglar and unlock the door using special master keys. They can be bought at a hardware store or made from paper clips and hairpins. How to open a door lock with a cylinder mechanism:

Take 2 paper clips or hairpins. Bend one at a right angle, it will serve as a tensioner, the second - in the form of a hook.
Insert the tensioner into the upper part of the mechanism, turn it towards the opening of the lock, creating tension.
Insert the second paperclip, hook the first pin, and give it the opening position. The fact that the pin has taken the desired position will be indicated by a click and rotation of the cylinder.
Repeat the manipulations with the remaining pins.

If the master keys do not help, the lock will have to be picked. How to do it:

Insert a flathead screwdriver deep into the cylinder. Try to turn it using force. If it works, remove the tool along with the mechanism and open the door.
If that doesn’t work, take a drill and a metal drill (4–5 mm). Drill through the cylinder and remove the mechanism.

Suvaldny

This lock consists of several plates with different notches and grooves. The complexity and safety class of the device depend on their number. To break the locking mechanism, you need to move the plates. How to open an iron door without a key with a lever lock:

Make a roll by bending the tip of a thin screwdriver.
Make a master key by crocheting and sharpening the tip of the knitting needle.
Insert both improvised master keys into the lock mechanism.
Push the roll all the way, turn it, creating tension. Move the hook, shifting each plate in turn and at the same time turning the roll. When you manage to move all the levers, the door will open.

If the master keys do not help, hack the device by damaging the secret support point:

Drill a hole at the location where the shank is attached.
Insert a hook made from a paper clip or stiff wire.
Turn the bolts, open the door.

Rack and pinion

The only way to break a rack lock is with a crowbar, damaging not only the mechanism, but also the door frame or leaf. How to try to open the device without a key:

Select 2 thin screwdrivers that can simultaneously enter the keyhole.
Insert 1 tool into the hole, “catch” the notch of the bolt with it and move it to the side. Insert a second screwdriver and secure the position of the valve.
Repeat the manipulations, moving all the crossbars one by one until the door opens.

The second way to break into a rack and pinion lock:

Drive a wooden wedge made of soft wood (spruce, pine, cedar) into the keyhole.
Pull it out and trim the resulting notches a little.
Unlock the closed door with the wedge key you received.

Mounted

This type of lock is opened using a pin, paper clip, or stiff wire. Sequencing:

Bend the edge of the available device into the letter G. Insert it into the upper part of the well, trying to get into the latch.
Rotate the master key until the locking element is released and the bracket is released.

If you can’t open the lock without a key, you can break it in one of two ways:

Insert 2 open-end wrenches into the bracket so that each of them grips one shackle and their side ribs touch. Pull the free edges of the tools together until the bracket breaks.
Screw the self-tapping screw into the cylinder and then pull it out along with the mechanism using a nail puller.

French

This type of mechanism cannot be opened without a key and the help of a specialist. You can only break a French lock on your own, thereby ruining the door leaf. This is done in the old fashioned way:

Insert a crowbar or a strong screwdriver into the gap next to the lock.
Use the device as a lever: press until the door leaf is deformed and the lock latch is disconnected.

If the key is broken in the lock

Often the reason for opening the front door is a broken key. In this case, you need to remove the fragment from the larva.

If a fragment is sticking out of the hole, try to grab it with pliers or tweezers, and then pull it out, swinging it from side to side.

If the key piece does not look out, remove it in one of the following ways:

Hook the saw blade from the jigsaw with the serrated side and remove it from the locking device.
Hook with a straightened fishhook, pin, or rounded thin wire, and then carefully pull out.
Hook the sharp ends of two thin awls, and, swinging, slowly remove it from the lock.
Remove with a strong magnet (if the material from which the key was made is magnetic).

How to open a car without a key

If the car slams shut and the key remains inside, you can open it in one of the following ways:

Using a small screwdriver or nail file, pry up the rubber seal on the glass, pull it out 3–4 cm. Bend a knitting needle or rigid wire at an angle of 45 degrees so that you get a hook 50 cm long. Insert it between the glass and the door until it stops in the lock, feel rod blocking device. Pull the hook to unlock the device.
For domestic cars and old-style foreign cars: remove the seal from the rear door window, remove the glass, insert your hand into the hole and unlock the lock. Reinstall the structure and contact a car service center.
If the lock is very loose, try unlocking it with a key from another car.

Video

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

Discuss

How to open a door without a key to a room or apartment

If the key is lost or broken and there is no duplicate, opening the door lock may be the only way to get inside the room. There are two ways to resolve this situation: try to open the door yourself, or contact commercial company, which provides similar services. There is another option: invite a mechanic from the housing office, but in this case you cannot count on a quick result, since first you will have to fill out an application for a call, and then be patient and wait for the visit of the foreman, the only one for the quarter. Opening the lock yourself will not be easy, especially if we are talking about an entrance door that has two locks installed. Let's take a closer look at all the possible options.

Opening an interior door causes the least problems, since simple locks are often installed in such structures. Such designs are equipped with a latch on one side and a keyhole on the other. Parents of inquisitive children often have to face this problem. A child can easily slam the door and turn the handle, but the reverse process may cause difficulties for him. Then parents are faced with two tasks at once: how to open the lock, and how to keep the door itself safe and sound. Here's what to do in this situation:

inspect the structure of the lock, the shape of the well;
select a tool that can be inserted into the well;
Carefully open the door, being careful not to damage the door leaf and lock.

The choice of tool depends on the shape of the keyhole. If it is round, then you will need a thin hard object: an awl, an unbent paper clip, a knitting needle or a toothpick. For a well with an elongated shape, you will need something flat: a screwdriver, a nail file, scissors or a knife. To open the door lock, you need to insert the tool into the hole. While pressing on it, turn the door handle. The main thing is not to overdo it so that the tool does not break and get stuck in the well.

There is another way to open a slammed door. To do this, insert a flat object between the end of the door and the frame, which needs to be used to slightly push the latch towards the lock. It is enough to move it just a few millimeters.

If the lock has a hole on each side, and a key remains inserted in one of them, it will not be difficult to deal with the problem if the design does not provide a threshold. You need to push the spread out newspaper under the door as far as possible. Then, with a sharp object, we push the key out of the hole, which should fall onto the newspaper. We take it out and open the door.

Opening entrance doors

Opening entrance doors is a more difficult task, since they usually have at least two locks. You should think carefully before trying to solve such a problem yourself: an unprofessional approach can have a detrimental effect on the condition of the door itself, and replacing a metal entrance structure is not a cheap pleasure. When getting started, do not forget that the main goal is to open locked locks, and not to break into the door.

The process for this activity will depend mainly on the type of lock. If the reason for opening the door was a broken key, you must first remove the fragment from the cylinder. To do this, first pour a few drops of lubricant into the keyhole: WD-40 or machine oil. It will take 15–20 minutes for it to spread evenly throughout the well, after which the debris can be removed. If a small part of the fragment protrudes out, this simplifies the task. It should be carefully grabbed with pliers or tweezers and, swinging from side to side, pulled out. If it is not possible to hook the fragment from the outside, you will need two thin objects, for example, an awl. We grab the stuck part with the tips, swing it and try to move it. When the fragment is removed, you will very soon open the door to the apartment: a good master will make a duplicate of the two broken halves, and this will solve the problem.

Now let's look at ways to open a door without a key if the key has been lost and it is not possible to make a duplicate.

Options for opening a cylinder lock

If you set the task to open cylinder lock and keep it in working condition, then you need to have masterly hacker skills. Such devices have a high level of secrecy, but for experienced craftsman It will not be difficult to open a cylinder lock with a hairpin or a regular paper clip, although it would be more convenient to use master keys. Let's consider an emergency option: how to open a door lock with a paper clip. We will use it as a master key, but we will also need a “roll-up”, which will serve as a screwdriver. The task is to straighten the paper clip, slightly bend the edge with a hook and insert it into the cylinder. Now you have to rely on your ears. Our task: to set the pins of the secret mechanism in the correct position. They must be lifted one by one, using an improvised master key and a roll. As already noted, this is a very difficult task, which is almost impossible to cope with without the proper skills.

There is a less delicate but more affordable way pick the door lock. It will require tools: an electric drill with a drill designed for metal, a flat-head screwdriver and a hammer. Sometimes a lock can be picked without drilling, so you should try this option first:

insert a flat screwdriver into the cylinder as deeply as possible;
using considerable effort, try to turn the screwdriver inside the lock;
upon successful attempt to pull out the screwdriver, along with which the secret should be removed.

This completes the task - the door can be opened. If this method is unsuccessful, you will have to take a drill. We point the drill directly into the larva and drill until we go through the entire secret to the end. After this, we take out the larva and open the door.

It is important! The method of drilling or knocking out a cylinder lock is completely powerless if the device is protected from hacking.

Methods for opening a lever lock

Using lockpicks Drilling

You can break the lever mechanism or try to open it in a delicate way.

To break the lock, it is necessary to remove the main pin of the structure, which is responsible for moving the levers. To do this, you will need a drill with a metal drill, a hook or bent strong wire, and a paper clip. But even if you have a tool, it will not be easy to complete this task, since you need to drill strictly in the place where the support point of the secret mechanism is located. When it is drilled, you need to insert a bent hook into the hole and turn it. In this case, all the levers move freely, and the door can be opened. As with cylinder mechanisms, this method is completely ineffective for burglary-resistant locks.

Now let's look at how to open a door lock with a lever lock, using master keys or objects that can replace them: paper clips, hairpins, pins. Opening lever door locks is performed with two master keys. The first is inserted into the keyhole until it touches the main board. The second is necessary to alternately select the desired position of the levers so that the main pin moves. You should be prepared for the fact that this process can take a lot of time and end in complete failure if you have never picked locks before. Therefore, it is more advisable to invite specialists.

How to open a rack lock

If a rack and pinion mechanism is installed on the entrance structure, opening the door lock without a key will not be very difficult. Since the rack and pinion lock is well protected from rough influence, we will not consider options for how to break it front door. Having a regular tool at hand, we can carefully open the mechanism in one of three ways.

Let's take two flat screwdrivers. They must be thin in order to freely enter the well at the same time. First, insert one screwdriver into the hole. We need to place it on the notch of the crossbar and move it to the side. Then insert a second screwdriver and use it to fix the position of the bolt. We repeat these steps until the lock is opened.
We can open the front door locks using a wooden wedge key. To make it we need a wooden wedge made of soft wood. The size must correspond to the parameters of the well. The wedge needs to be driven into the hole, then pulled out. There will be noticeable marks on the surface of the wood. You will have to trim the wood a little to make something like a key and open the door.
This option is only available if there is a distance between the door leaf and the frame into which a crowbar can be inserted. The tool is placed in the gap between the jamb and the door, then pressed until it stops. We have a gap where we can insert a flat-head screwdriver and use it to move the bolts inside the lock.

Opening a padlock

Method 1 Method 2 Method 3

Padlocks are not very strong, but they are often used to protect utility rooms, sheds, and basements. If keys are lost, such locks are usually broken into because they are of little value. Here's how to break padlocks:

Take two open-end wrenches and insert them so that each of them grips one shackle of the lock. The keys should be in contact with their side ribs. The free edges of the keys must be pulled towards each other. As a result, part of the lock near the latch breaks.
Cut out a small plate from a tin can and bend one edge. With the unbent side, we insert the workpiece into the slot that separates the lock body and the opening shackle. Use a screwdriver to push the plate deeper. As a result, the latch opens.
For the third option we will need a self-tapping screw and a nail puller. We screw the self-tapping screw into the lock cylinder, then we hook it with a nail puller and pull out the cylinder.

Conclusion

Losing your keys is not a reason to panic, but it is also not the most suitable occasion to urgently master the skills of a locksmith. Opening doors without a key, even if you have the necessary tool at hand, is not an easy task. Inept handling of the lock can only aggravate the situation. If you are not confident in your abilities, it would be advisable to contact a specialized company whose specialists have all the necessary equipment and know exactly how to open the front door without a key so as not to damage the door and lock.

Interior doors do not perform security functions: the material itself and the simplicity of the lock do not imply a serious restriction of access. However, locks are often embedded in the sash in order to limit access to the room, protect against drafts, and so on. Knowing how to open a lock without a key on an interior door is never superfluous.

How to open the door yourself?

The resolution of this situation depends on who locked themselves in and why, and most importantly, in which room of the house. If you find yourself locked inside a toilet, getting out without help will be difficult. And if a child accidentally locks himself in the living room, the situation requires prompt resolution.

How to open a slammed interior door without a key depends on the circumstances and complexity of the locking mechanism:

most often they use a handy master key - an object that can fulfill this role;
you can disassemble the fittings if you find something like a screwdriver in the house;
the sash can be removed from its hinges if time does not allow resorting to other methods;
after all, an interior door can be knocked down if physical strength allows.

The latter method is, of course, undesirable.

Method one

At home you can always find some simple tool for opening a lock. But the first thing that comes to mind is the traditional solution in the form of a hairpin or a piece of thick wire. Since the locks on room doors have changed little over time, this method is still valid.

A hairpin, preferably half, is placed in the keyhole and twisted, trying to engage the mechanism. Once this happens, you just need to turn it in the right direction.

Without skill, this method of opening a slammed door takes a lot of time. So if you need to act urgently, you should use another option.

Second way

How to open the handle of an interior door without a key is largely determined by which side of the door you find yourself on. If this happens in the corridor and there are no pins or wires at hand, you can use a regular plastic card, which you can always find in your bag.

If the tongue has simple design, then just slide it into the gap between the lock and the door frame to push the tongue in and unlock the slammed door yourself.

The same role is performed by any flat, durable object: a nail file, a table knife, a screwdriver. Some people get by with their fingernails.

Method three

At home you can always find something like a screwdriver, nail file, manicure scissors, and so on. All these devices can be used to dismantle the interior door handle. In this case, its shape - round or pressed - does not matter. However, if we are talking about a noba - a round handle, dismantling will take more time, since to unlock the sash you will have to remove the entire mechanism.

The principle of operation is the same: use the tip of a screwdriver, scissors or a file to unscrew the fastening screws. Depending on the mechanism, you may only need to remove the decorative trim to get to the tongue, or you may need to completely disassemble the entire mechanism in order to remove the lock.

This is the most universal method, as it allows you to open not just a slammed door in the house, but also a door with a damaged lock. The photo shows how to open a door with a round handle.

Method four

This method is suitable for those options where the latch looks like a small key. The latter, with a strong push, falls down and blocks the door leaf.

To “free yourself”, you need to find a hole in the bottom of the fittings - a blocker, insert a knitting needle, a pin, a nail into it, and press. This way the key is pushed out and the door opens.

Method five

This way, you can open the door without a key in extreme circumstances, when other options are not feasible, and there is no way to wait for a specialist to arrive. To do this, drive a chisel between the frame and the canvas and squeeze out the tongue with it. The sash is damaged, but the method allows you to open it as quickly as possible.

How to open an interior door without a key is presented in detail in the video.